Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 320)

308 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For an overview of the VPN options available using the applet (GUI), see Configuring VPN Tunnels
on page 6-216.
br7131>admin(network.wan.vpn)>add
Description:
Adds a VPN tunnel entry.
Syntax:
Example:
admin(network.wan.vpn)>
add 2 SJSharkey 209.235.44.31 206.107.22.46
255.255.255.224 206.107.22.1
If tunnel type is Manual, proper SPI values and Keys must be configured after
adding the tunnel
admin(network.wan.vpn)>
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page
6-216.
br7131>admin(network.wan.vpn)>set
Description:
Sets VPN entry parameters.
delete Deletes VPN tunnel entries.
list Lists VPN tunnel entries
reset Resets all VPN tunnels.
stats Lists security association status for the VPN tunnels.
ikestate Displays an Internet Key Exchange (IKE) summary.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
add
Creates a tunnel (1 to 13 characters) to gain access through local WAN IP from the remote subnet
with address and subnet mask using the remote gateway .