Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 301)

Brocade Mobility 7131 Access Point Product Reference Guide 289
53-1002517-01
8
admin(network.lan)>
set username phil
admin(network.lan)>
set passwd ea0258c1
Related Commands:
For information on configuring the LAN using the applet (GUI), see Configuring the LAN Interface on
page 5-115.
Network LAN, Bridge Commands
br7131>admin(network.lan.bridge)>
Description:
Displays the Mobility 7131 Access Point Bridge submenu.
For an overview of the access point’s mesh networking options using the applet (GUI), see on page
9-443.
br7131>admin(network.lan.bridge)>show
Description:
Displays the mesh bridge configuration parameters for the Mobility 7131 Access Point’s LANs.
Syntax:
Example:
admin(network.lan.bridge)>
show
** LAN1 Bridge Configuration **
Bridge Priority :63335
Hello Time (seconds) :2
Message Age Time (seconds) :20
show Shows the current settings for the Mobility 7131 Access Point LAN port.
show Displays the mesh configuration parameters for the Mobility 7131 Access
Point’s LANs.
set Sets the mesh configuration parameters for the Mobility 7131 Access
Point’s LANs..
.. Moves to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.
show Displays mesh bridge configuration parameters for the Mobility 7131 Access Point’s LANs.