Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 60)

48 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
2
Single Radio 2.4 GHz LEDs
A single 2.4 Ghz radio model has the following unique LED behavior:
Single Radio 5 GHz LEDs
A single 5 Ghz radio model has the following unique LED behavior:
LED 1 LED 2 (LAN) LED 3 (WAN) LED 4 - 5 GHz LED 5 - 2.4 GHz LED 6
Blinking Red
indicates booting.
Solid Red defines the
diagnostic mode.
White defines normal
operation. Green defines
normal GE1
operation. Green defines
normal GE2
operation. Off Blinking Emerald
indicates 802.11bg
activity.
A 5 second
Emerald and
Yellow blink rate
defines 802.11bgn
activity.
A 2 second
Emerald and
Yellow blink rate
defines 802.11bgn
(40 MHz) activity.
When functioning
as a sensor, LED
alternates between
Emerald and
Yellow.
The blink interval is
0.5 seconds. It’s 1
second when no
Server is connected Not used
LED 1 LED 2 (LAN) LED 3 (WAN) LED 4 - 5 GHz LED 5 - 2.4 GHz LED 6
Blinking Red
indicates booting.
Solid Red defines
the diagnostic
mode. White
defines normal
operation. Green defines
normal GE1
operation. Green defines
normal GE2
operation. Blinking Amber
indicates 802.11a
activity.
A 5 second Amber
and Yellow blink
rate defines
802.11an activity.
A 2 second Amber
and Yellow blink
rate defines
802.11an
(40 MHz) activity.
When functioning
as a sensor, LED
alternates between
Amber and Yellow.
The blink interval is
0.5 seconds. It’s 1
second when no
Server is
connected. Off Not used