Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 307)

Brocade Mobility 7131 Access Point Product Reference Guide 295
53-1002517-01
8
Syntax:
admin(network.lan.wlan-mapping)>
vlan-map wlan1 vlan1
For information on mapping VLANs using the applet (GUI), see Configuring VLAN Support on page
5-118.
Network LAN, DHCP Commands
br7131>admin(network.lan.dhcp)>
Description:
Displays the Mobility 7131 Access Point DHCP submenu. The items available are displayed below.
br7131>admin(network.lan.dhcp)>show
Description:
Shows DHCP parameter settings.
Syntax:
Example:
admin(network.lan.dhcp)>
show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
vlan-map Maps an existing WLAN to an enabled LAN. All names and IDs are
case-sensitive.
Defines the existing VLAN name. All names and IDs are case-sensitive.
show Displays DHCP parameters.
set Sets DHCP parameters.
add Adds static DHCP address assignments.
delete Deletes static DHCP address assignments.
list Lists static DHCP address assignments.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.
show Displays DHCP parameter settings for the Mobility 7131 Access Point. These parameters are
defined with the set command.