Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 316)

304 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For an overview of the NAT configuration options available using the applet (GUI), see
Configuring Network Address Translation (NAT) Settings on page 5-132.
br7131>admin(network.wan.nat)>show
Description:
Displays Mobility 7131 Access Point NAT parameters.
Syntax:
Example:
admin(network.wan.nat)>
show 2
WAN IP Mode : enable
WAN IP Address : 157.235.91.2
NAT Type : 1-to-many
Inbound Mappings : Port Forwarding
unspecified port forwarding mode : enable
unspecified port fwd. ip address : 111.223.222.1
one to many nat mapping
-----------------------------------------------------------------------------
--
LAN No. WAN IP
-----------------------------------------------------------------------------
--
1 157.235.91.2
2 157.235.91.2
admin(network.wan.nat)>
For an overview of the NAT options available using the applet (GUI), see Configuring Network
Address Translation (NAT) Settings on page 5-132.
br7131>admin(network.wan.nat)>set
Description:
Sets NAT inbound and outbound parameters.
list Lists NAT entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Displays Mobility 7131 Access Point NAT parameters for the specified NAT index (1-8).