Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 117)

Brocade Mobility 7131 Access Point Product Reference Guide 105
53-1002517-01
4
NOTE
Use the System Settings screen as necessary to restore an Mobility 7131 Access Point’s default
configuration. For more information on restoring configurations, see Configuring System Settings on
page 4-67.
NOTE
For configuration file creation and export operations, only the set
radio-config (1-8, depending on the SKU) shall be supported.
The export function will always export the encrypted Admin User password. The import function will
import the Admin Password only if the access point is set to factory default. If the access point is
not configured to factory default settings, the Admin User password WILL NOT get imported.
A configuration file from a single radio Mobility 7131 Access Point can be imported to a single radio
model Mobility 7131N Access Point. Similarly, a configuration file from a dual radio Mobility 7131
Access Point can be imported to a dual radio model
Mobility 7131N Access Point.
CAUTION
A single-radio model access point cannot import/export its configuration to a dual-radio model
access point. In turn, a dual-radio model access point cannot import/export its configuration to a
single-radio access point.
NOTE
When modifying the text file manually and spaces are used for wireless, security, MU policy names
etc., ensure you use “\20” between the spaces. For example, “Second\20Floor\20Lab”. When
imported, the name would display as “Second Floor Lab”.
Use the Config Import/Export screen to configure an import or export operation for Mobility 7131
Access Point configuration settings.
CAUTION
Brocade Mobility discourages importing a 1.0 baseline configuration file to a 1.1 version access
point. Similarly, a 1.1 baseline configuration file should not be imported to a 1.0 version access
point. Importing configuration files between different versions results in broken configurations,
since new features added to the 1.1 version access point cannot be supported in a 1.0 version
access point.
To create an importable/exportable Mobility 7131 Access Point configuration file:
1. Select System Configuration - > Config Import/Export from the Mobility 7131 Access Point
menu tree.