Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 47)

Brocade Mobility 7131 Access Point Product Reference Guide 35
53-1002517-01
2
For a more exhaustive overview of the antennas and associated components supported by the
Brocade Mobility access point family, refer to the Enterprise Wireless LAN Antenna Specification
Guide available at
http://support.symbol.com/support/product/manuals.do.
Power Options
The power options for either a Mobility 7131 Access Point and Mobility 7131N Access Point include:
• 48-Volt Power Supply (Part No. 50-14000-247R)
• Power Injector (Part No. AP-PSBIAS-1P3-AFR)
CAUTION
A Mobility 7131 Access Point and Mobility 7131N Access Point cannot use the AP-5181
recommended 48-Volt Power Supply (Part No. 50-14000-243R), and must use the 48-Volt Power
Supply designed specifically for use with the Mobility 7131 Access Point model family (Part No.
50-14000-247R). Additionally, a single-port Power of Ethernet Power Injector is available for use
with the Mobility 7131 Access Point and
Mobility 7131N Access Point (Part No. AP-PSBIAS-1P3-AFR). Only these two powering solutions
should be used with the Mobility 7131 Access Point and Mobility 7131N Access Point.
Power Injector System
The Mobility 7131 Access Point and Mobility 7131N Access Point can receive power via an Ethernet
cable connected to the access point’s GE1/POE (LAN) port.
Part No. Antenna Type Approximate Gain (dBi)
ML-5299-WPNA1-01R Panel Antenna 13
ML-5299-HPA1-01R Wide-Band Omni-Directional
Antenna 5.0
ML-2452-APA2-01 Dual-Band 3/4
ML-2452-PTA2M3X3-1 Facade with 6 Element
Antenna Module 4.75/5.5
ML-2452-PTA3M3-036 3 Port MIMO Antenna 5/5
ML-2452-APA6J-01 Dipole 2.4GHz Peak Gain: -5.76dBi
5GHz Peak Gain:
band 1: -3.77dBi
band 2: -3.38dBi
band 3: -2.84dBi
band 4: -2.94dBi