Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 172)

160 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
5
8. Select the Restore Default Files button to overwrite the customized files created on behalf of
this WLAN and replace them with the default files provided with the access point firmware.
Filename(s) Provide the name of the target file either imported or exported from the FTP server. Up to
10 files can be used, and each must not exceed 39 characters.
Filepath(optional) Optionally provide the path to the hotspot files specified within the Filenames field. The
path cannot exceed 39 characters.
FTP Server IP Address Enter the IP address of the FTP server used by the access point to import and export
hotspot file information to the clients providing hotspot access.
Username Specify a username to be used when logging in to the FTP server.
Password Define a password allowing access to the FTP server for the hotspot import or export
operation.
Import Select the Import button to begin an FPT transfer from the hosting access point to the
hotspot enabled client. Refer to the Status field for the results of the import operation.
Selecting Import also saves the configuration before performing the import operation.
Export Select the Export button to begin an FPT transfer from the hotspot enabled client to the
hosting access point. Refer to the Status field for the results of the export operation.
Selecting Export also saves the configuration before performing the export operation.
Status Displays the Pass or Fail designation of the most recent import or export operation.