Br7131>admin(network.wan.nat)>add, Syntax: example, Description – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 317: Syntax
Brocade Mobility 7131 Access Point Product Reference Guide
305
53-1002517-01
8
Syntax:
Example:
admin(network.wan.nat)>
set type 2 1-to-many
admin(network.wan.nat)>
set ip 2 10.1.1.1
(this command is used when NAT is 1-to-1)
admin(network.wan.nat)>
show 2
WAN IP Mode
: enable
WAN IP Address
: 157.235.91.2
NAT Type
: 1-to-many
Inbound Mappings
: Port Forwarding
unspecified port forwarding mode
: enable
unspecified port fwd. ip address
: 111.223.222.1
one to many nat mapping
-----------------------------------------------------------------------------
--
LAN No.
WAN IP
-----------------------------------------------------------------------------
--
1
157.235.91.2
2
10.1.1.1
For an overview of the NAT options available using the applet (GUI), see Configuring Network
Address Translation (NAT) Settings on page 5-132.
br7131>admin(network.wan.nat)>add
Description:
Adds NAT entries.
Syntax:
set type
Sets the type of NAT translation for WAN address index
1
-
8
) to
ip
Sets NAT IP mapping associated with WAN address
specified IP address
inb
Sets inbound IP address for specified index
Sets inbound mode for specified index
outb
Sets outbound IP address for specified index
Sets outbound NAT destination
add
Sets an inbound network address translation (NAT) for WAN address
entry (1 to 7 characters),
is the starting port number in a port range,
internal IP address, and