Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 58)

46 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
2
The LEDs on the top housing of the access point are clearly visible in wall and below ceiling
installations. The top housing LEDs have the following display and functionality:
Three Radio Mobility 7131N Access Point LEDs
A three radio model Mobility 7131N Access Point has the following unique LED behavior:
LED 1 LED 2 (LAN) LED 3 (WAN) LED 4 - 5 GHz LED 5 - 2.4 GHz LED 6
Blinking Red
indicates
booting. Solid
Red defines
the diagnostic
mode.
White defines
normal
operation. Green
defines
normal GE1
operation. Green
defines
normal GE2
operation. Blinking Amber
indicates 802.11a
activity.
A 5 second Amber
and Yellow blink
rate defines
802.11an activity.
A 2 second Amber
and Yellow blink
rate defines
802.11an
(40 MHz) activity.
When functioning
as a sensor, LED
alternates between
Amber and Yellow.
The blink interval is
0.5 seconds. It’s 1
second when no
Server is
connected. Blinking Emerald
indicates 802.11bg
activity.
A 5 second
Emerald and
Yellow blink rate
defines 802.11bgn
activity.
A 2 second
Emerald and
Yellow blink rate
defines 802.11bgn
(40 MHz) activity.
When functioning
as a sensor, LED
alternates between
Emerald and
Yellow.
The blink interval is
0.5 seconds. It’s 1
second when no
Server is
connected. Blinking Emerald
indicates the radio
is defined as a
sensor, but is
disabled. Alternates
between Emerald
and Amber when
the radio is defined
as a sensor with no
Server connected.
The blink interval is
1 second.
Alternates between
Emerald and
Amber when the
radio is defined as
a sensor and a
Server is
connected. The
blink interval is 0.5
seconds.