Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 221)

Brocade Mobility 7131 Access Point Product Reference Guide 209
53-1002517-01
6
To configure multiple cipher support:
1. Create a WLAN supporting WEP64 as its security scheme.
For information on how to create or edit a WLAN and assign it a security scheme, see
Creating/Editing Individual WLANs on page 5-139.
For information on how to assign a WLAN a security policy supporting WEP, see Configuring
WEP Encryption on page 6-199.
2. Create a second WLAN with the same ESSID as the WLAN created in step 1. However, assign
the second WLAN a security policy supporting WPA2-CCMP.
For information on how to assign a WLAN a security policy supporting WEP, see Configuring
WPA2-CCMP (802.11i) on page 6-205.
NOTE
Ensure the WLANs created in steps 1 and 2 have unique names assigned.
3. Map the WLANs created in steps 1 and 2 to different BSSID groups.
a. Select Network Configuration -> Wireless -> Radio Configuration -> Radio1 or Radio 2 from
the access point’s menu tree.
b. Select the Advanced Settings tab.
c. MAP BSSIDs (4 BSSIDs are available for mapping) to WLANs. For additional information on
how to MAP BSSIDs to WLANs, see Configuring the 802.11a/n or 802.11b/g/n Radio on
page 5-167.
CAUTION
When WLANs with WEP64/WEP128/TKIP/CCMP cipher suites are in the same BSSID group, a
common cipher for the group encryption key cannot be set. Brocade Mobility recommends
grouping WLANs strategically into different BSSID groups. The status field in the WLAN-BSSID
group mapping displays whether the WLANs in a particular BSSID group are up or not.