Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 384)

372 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(network.router)>show
Description:
Shows the access point route table.
Syntax:
Example:
admin(network.router)>
show rip
rip type : off
rip direction : both
rip authentication type : none
rip simple auth password : *********
rip md5 id 1 : 1
rip md5 key 1 : *********
rip md5 id 2 : 1
rip md5 key 2 : *********
admin(network.router)>
show routes
----------------------------------------------------------------------------
index destination netmask gateway interface metric
----------------------------------------------------------------------------
1 192.168.2.0 255.255.255.0 0.0.0.0 lan1 0
2 192.168.1.0 255.255.255.0 0.0.0.0 lan2 0
3 192.168.0.0 255.255.255.0 0.0.0.0 lan1 0
4 192.168.24.0 255.255.255.0 0.0.0.0 wan 0
5 157.235.19.5 255.255.255.0 192.168.24.1 wan 1
Default gateway Interface: wan
For information on configuring the Router options available to the access point using the applet
(GUI), see Configuring Router Settings on page 5-178.
br7131>admin(network.router)>set
Description:
Shows the access point route table.
list Lists user-defined routes.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show rip Displays the rounter’s RIP parameters.
routes Displays connected routes.