Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 212)

200 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
6
To configure WEP on the Mobility 7131 Access Point:
1. Select Network Configuration -> Wireless -> Security from the Mobility 7131 Access Point menu
tree.
If security policies supporting WEP exist, they appear within the Security Configuration
screen. These existing policies can be used as is, or their properties edited by clicking the
Edit button. To configure a new security policy supporting WEP, continue to step 2.
2. Click the Create button to configure a new policy supporting WEP.
The New Security Policy screen displays with no authentication or encryption options
selected.
3. Select either the WEP 64 (40 bit key) or WEP 128 (104 bit key) radio button.
The WEP 64 Settings or WEP 128 Settings field displays within the New Security Policy
screen.
4. Ensure the Name of the security policy entered suits the intended configuration or function of
the policy.
5. Configure the WEP 64 Settings or WEP 128 Settings field as required to define the Pass Key
used to generate the WEP keys. These keys must be the same between the access point and
its MU to encrypt packets between the two devices.