Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 298)

286 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Example:
admin>
quit
Network Commands
br7131>admin(network)>
Description:
Displays the network submenu. The items available under this command are shown below.
Network LAN Commands
br7131>admin(network.lan)>
Description:
Displays the LAN submenu. The items available under this command are shown below.
lan Goes to the LAN submenu.
wan Goes to the WAN submenu.
wireless Goes to the Wireless Configuration submenu.
firewall Goes to the Firewall submenu.
router Goes to the Router submenu.
ipfilter Goes to the IP Filter submenu
dhcpc-host-opt Goes to the DHCPC submenu
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the system flash.
quit Quits the CLI and exits the current session.
show Shows current Mobility 7131 Access Point LAN parameters.
set Sets LAN parameters.
bridge Goes to the mesh configuration submenu.
wlan-mapping Goes to the WLAN/Lan/Vlan Mapping submenu.
dhcp Goes to the LAN DHCP submenu.
type-filter Goes to the Ethernet Type Filter submenu.
ipfpolicy Goes to the LAN IP Filter Policy submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.