Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 373)

Brocade Mobility 7131 Access Point Product Reference Guide 361
53-1002517-01
8
For information on configuring the Rate Limiting options available to the access point using the
applet (GUI), see
Configuring MU Rate Limiting on page 5-176.
Network Rogue-AP Commands
br7131>admin(network.wireless.rogue-ap)>
Description:
Displays the Rogue AP submenu. The items available under this command include:
br7131>admin(network.wireless.rogue-ap)>show
Description:
Displays the current Mobility 7131 Access Point Rogue AP detection configuration.
Syntax:
Example:
admin(network.wireless.rogue-ap)>
show
MU Scan : disable
MU Scan Interval : 60 minutes
On-Channel : disable
Detector Radio Scan : enable
Auto Authorize Brocade APs : disable
Approved APs age out : 0 minutes
Rogue APs age out : 0 minutes
show Displays the current Mobility 7131 Access Point Rogue AP detection configuration.
set Defines the Rogue AP detection method.
mu-scan Goes to the Rogue AP mu-uscan submenu.
allowed-list Goes to the Rogue AP Allowed List submenu.
active-list Goes the Rogue AP Active List submenu.
rogue-list Goes the Rogue AP List submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Displays the current Mobility 7131 Access Point Rogue AP detection configuration.