Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 137)

Brocade Mobility 7131 Access Point Product Reference Guide 125
53-1002517-01
5
3. Specify a lease period in seconds for available IP addresses using the DHCP Lease Time
(Seconds) parameter. An IP address is reserved for re-connection for the length of time you
specify. The default interval is 86400 seconds.
4. Click the Add button to create a new table entry within the Reserved Clients field.
If a statically mapped IP address is within the IP address range in use by the DHCP server,
that IP address may still be assigned to another client. To avoid this, ensure all statically
mapped IP addresses are outside of the IP address range assigned to the DHCP server.
If multiple entries exist within the Reserved Clients field, use the scroll bar to the right of
the window to navigate.
5. Click the Del (delete) button to remove a selected table entry.
6. Click OK to return to the LAN1 or LAN2 page, where the updated settings within the Advanced
DHCP Server screen can be saved by clicking the Apply button.
7. Click Cancel to undo any changes made. Undo Changes reverts the settings displayed to the
last saved configuration.
Setting the Type Filter Configuration
Each Mobility 7131 Access Point LAN (either LAN1 or LAN2) can keep a list of frame types that it
forwards or discards. The Type Filtering feature prevents specific (a potentially unneccesary)
frames from being processed by the Mobility 7131 Access Point in order to improve throughput.
These include certain broadcast frames from devices that consume bandwidth, but are
unnecessary to Mobility 7131 Access Point operations.