Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 354)

342 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Two Radio SKU
Single Radio SKU
NOTE
For legacy (pre 4.1) deployments, imported radio configurations are supported (with the exception
of the removed (11a, 11b, wips-radio and rf-function) commands. However, the configuration export
operation only exports the radio-config (1-8).
For information on the options available to the access point, see Setting the Radio Configuration
for a WLAN on page 5-161.
br7131>admin(network.wireless.radio.802-11n[2.4 GHz])>
Description:
Displays a specific 802.11n 2.4 GHz radio 1 submenu. The items available under this command
include:
Syntax:
For information on configuring Radio 1 Configuration options available to the access point using
the applet (GUI), see Setting the Radio Configuration for a WLAN on page 5-161.
set radio-config
1 Radio 1 WLAN, Radio 2 WIPS
2 Radio 1 WIPS, Radio 2 WLAN
3 Radio 1 WLAN, Radio 2 WLAN
4 Radio 1 WIPS, Radio 2 WIPS
5 Radio 1 WLAN, Radio 2 Disabled
6 Radio 1 Disabled, Radio 2 WLAN
7 Radio 1 Disabled, Radio 2 Disabled
set radio-config
1 Radio 1 WIPS
2 Radio 1 WLAN (B/G/N)
3 Radio 1 WLAN (A/N)
4 Radio 1 Disabled
show Displays 802.11n (2.4 GHz) radio settings.
set Defines specific 802.11n (2.4 GHz) radio parameters.
advanced Displays the Adavanced radio settings submenu.
mesh Goes to the Wireless AP Connections submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.