Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 67)

Brocade Mobility 7131 Access Point Product Reference Guide 55
53-1002517-01
3
Configuring Device Settings
Configure a set of minimum required device settings within the Quick Setup screen. The values
(LAN, WAN etc.) can often be defined in other locations within the menu tree. When you change the
settings in the Quick Setup screen, the values also change within the screen where these
parameters also exist. Additionally, if the values are updated in these other screens, the values
initially set within the Quick Setup screen will be updated.
NOTE
A scheme for radio configuration and WIPS server management has been added within the Quick
Setup GUI applet. Up to eight radio buttons are now available (depending on the number radios
supported by the SKU). These radio buttons define how WLAN and sensor functionality are
supported amongst the radios available to the access point. The options available depend on the
SKU supported (and are described within this section).
To define a basic access point configuration:
1. Select System Configuration -> Quick Setup from the menu tree, if the Quick Setup screen is
not already displayed.
2. Select the System Configuration tab to define the access point’s system, WIPS server and
radio configuration.
NOTE
The WIPS Server designation and radio configuration is defined as part of the access point’s quick
setup. For a description of sensor functionality and how it relates to access point operation, see
Sensor Support on page 1-7.