Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 446)

434 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For information on displaying WAN port statistics using the applet (GUI), see Viewing WAN Statistics
on page 7-253.
For information on displaying LAN port statistics using the applet (GUI), see Viewing LAN Statistics
on page 7-256.
For information on displaying Wireless statistics using the applet (GUI), see Viewing Wireless
Statistics on page 7-261.
For information on displaying individual WLAN statistics using the applet (GUI), see Viewing WLAN
Statistics on page 7-262.
For information on displaying Radio statistics using the applet (GUI), see Viewing Radio Statistics
Summary on page 7-266.
For information on displaying MU statistics using the applet (GUI), see Viewing MU Statistics
Summary on page 7-271.
For information on displaying Mesh statistics using the applet (GUI), see Viewing the Mesh
Statistics Summary on page 7-275.
For information on displaying Known AP statistics using the applet (GUI), see Viewing Known
Access Point Statistics on page 7-277.
br7131>admin(stats)>send-cfg-ap
Description:
Copies the Mobility 7131 Access Point’s configuration to another Mobility 7131 Access Point within
the known AP table.
Syntax:
lan Displays stats for the Mobility 7131 Access Point LAN port
stp Displays LAN Spanning Tree Status
wlan Displays WLAN status and statistics summary.
s-wlan Displays status and statistics for an individual WLAN
radio Displays a radio statistics transmit and receive summary.
s-radio Displays radio statistics for a single radio
retry-hgram Displays a radio’s retry histogram statistics.
mu Displays all mobile unit (MU) status.
s-mu Displays status and statistics for an individual MU.
auth-mu Displays single MU Authentication statistics.
mesh Displays Wireless Bridge Statistics statistics summary.
s-mesh Displays single Wirless Bridge statistics.
known-ap Displays a Known AP summary.
packets_per_legacy_rate Displays packets for legacy rates for a defined index.
packets_per_mcs_rate Displays packets for mcs rates for a defined index.
send-cfg-ap Copies the Mobility 7131 Access Point’s configuration to the Mobility 7131 Access Points
within the known AP table. Mesh configuration attributes do not get copied using this
command and must be configured manually.