Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 397)

Brocade Mobility 7131 Access Point Product Reference Guide 385
53-1002517-01
8
Syntax:
admin(system.aap-setup)>
set auto-discovery enable
admin(system.aap-setup)>
set ipadr 192.235.111.10
admin(system.aap-setup)>
set port 1812
admin(system.aap-setup)>
set passphrase mudskipper
admin(system.aap-setup)>
set load-balancing enable
For information on configuring adaptive AP using the applet (GUI), see
Adaptive AP Setup on page 4-75.
For an overview of adaptive AP functionality and its implications, see Adaptive AP on page 10-471.
br7131>admin(system.aap-setup)>delete
Description:
Deletes static switch address assignments.
Syntax:
Example:
admin(system.aap-setup)>
delete 1
admin(system.aap-setup)>
For information on configuring Adaptive AP using the applet (GUI), see Adaptive AP Setup on page
4-75.
For an overview of adaptive AP functionality and its implications, see Adaptive AP on page 10-471.
set auto-discovery Sets the switch auto-discovery mode (enable/disable).
ipadr Defines the switch IP address used.
name Defines the switch name for DNS lookups (up to 127 characters).
port Sets the port.
passphrase Defines the pass phrase or key for switch connection.
tunnel-to-switch Enables/disables the tunnel between switch and access point.
ac-keepalive Defines the keepalive interval.
load-balancing Enables or disables AAP load balancing.
delete Deletes static switch address assignments by selected index.
Deletes all assignments.