Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 99)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 97
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
Timeout
The timeout trigger allows triggering based on the occurrence or non‐occurrence of two
events within a pre‐defined period of time. Patterns can be added to the Start Events and
End Events list. An occurrence of a pattern of the Start Events list starts the timer, or
resets the timer if the timer is already running. Depending on the configurable Trigger
mode, the trigger is activated when the End Event(s) occur before the timer expires, or
the timer expires before the End Event(s) occurs.
Figure 2.60: Timeout Pattern Dialog