Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 361)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 357
Scenario Actions Teledyne LeCroy
For example, for Register H ‐> D FIS:
Pattern: 0x00000027
Mask: 0x000000FF
Offset: 0
SOF Type: SATA_SOF
4.8 Scenario Actions
After you enter the set of events for a test state, the menu‐driven interface prompts you
for the corresponding action or set of actions. If you define multiple actions, the actions
occur simultaneously (see
Figure 4.20 on page 357 .)
Figure 4.20: Action Properties Dialog
The following table lists supported actions. Note that some of these actions only apply to
creating sequences.