Incoming scsi frame settings – Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual
Page 156
Teledyne LeCroy
Emulation
154
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Field of Frame
Select Destroy, scroll through the available choices in the Field of Frame list box, and
choose a field to destroy. Alternatively, you can select Specify Value to fill the chosen
field with a pre‐defined value.
Insert Frame
You can insert a frame before or after the current frame. To insert a frame, check Insert
Frame, check the option button at which to insert the frame, and choose a Frame Type.
Figure 2.142: SAS: Insert Frame
Incoming SCSI Frame Settings
Before selecting Incoming Frame Settings, select the Types Of Frames and the
Frame Number on which to inject an error. Then check Incoming Frame in the Generate
Error On area and then the enabled Settings button to display the Incoming Frame
Setting dialog (see
).
Figure 2.143: SAS: Incoming Frame Setting Dialog (SCSI)
Handshake Error
Check Handshake Error and select NAK CRC Error, No Handshake, or Primitive and a
Primitive Type. Select Drop link for to drop link for the specified milliseconds
Defer Handshake
Check the Defer Handshake after check box and enter a value for the time to defer the
handshake.