Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 96)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
94 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Click the down arrow next to the Address Frame Type dropdown list, scroll the list to
choose an address frame type on which to trigger, and click OK.
Choose an Address Frame Type from the drop‐down list and click OK.
STP Frame
Double‐click STP Frame in the Patterns window of the Trigger dialog to open the STP
Frame Type dialog.
Figure 2.56: SATA: FIS Pattern Dialog
SAS vs. SATA: Not available in SATA.
Click the down arrow next to the FIS type dropdown list, scroll the list to choose an FIS
type on which to trigger, and click OK.