Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 166)

Teledyne LeCroy Emulation
164 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Figure 2.153: ATA Command Execution Timeout
Choose Host Emulator Port
For each port, select a speed.
Pattern Generator
You can select a Pattern Generation file. To perform a capture with a Pattern Generator,
enter a path to a pattern generator *.spg file in the File Name dialog. See
“Creating a
Pattern Generator File” on page 477 for instructions how to create a Pattern Generator
file.
Host Emulator
You can run an Host Emulator while setting:
 Auto stop Exerciser when Analyzer stopped
 Auto stop Analyzer when Exerciser stopped
 CONT usage
 Auto update “Sector Count” before running
 Delay between getting HOLD to Sending HOLDA
 Data Frame Payload Size
 ATA Command Execution Timeout
 Logical Block Size (for ATAPI)
Check Autostop exerciser when Analyzer Stopped to halt the Host Emulator when the
Analyzer stops.