16 example projects, 17 run an example analysis project – Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual
Page 65
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
63
SAS/SATA Software Menus and Toolbars
Teledyne LeCroy
*.stc
SATA Protocol Analyzer/Capture Project/Viewer file (in the Examples folder
“EasyCaptr”, “AdvanceCaptr”, or “Exerciser” subfolders)
*.std
Target Emulator file (in the Examples folder “Target Emulator” subfolder)
*.sts
SATA Sample file (in the SATA Examples folder “Sample” subfolder)
*.tsh
SATA Search configuration file
*.wss
SAS Workspace file (in the SAS System folder “Predefined\Workspace”
subfolder)
*.wst
SATA Workspace file (in the SATA System folder “PreDefined\Workspace”
subfolder)
2.2.16
Example Projects
The Analyzer includes example projects that you can use to perform an immediate
analysis without any setup.
The Analyzer system software has a pre‐defined folder (directory) structure for storing all
files. All example files are in the Examples folder under the Sierra M6‐4 folder.
It is strongly recommended that you open some example files to see types of projects
that you can create.
2.2.17
Run an Example Analysis Project
To run an example project:
1. Select File > Open to display the Open dialog (see
).
2. Locate example analysis projects by looking in the Examples folder. Examples are
available for AdvanceCaptr, EasyCaptr, Exerciser, Infusion, PatternGenerator,
Performance Analyzer Review Files, Performance Analyzer, Samples,
Target Emulator and User Define Decoding Script.
3. In the EasyCaptr folder, choose an example *.sac file and click Open to display the
example project dialog (see
).