Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 260)

Teledyne LeCroy SAS Verification (SAS)
256 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Figure 3.73: SAS Verification Dialog
Speed Negotiation has Speed Negotiation Window Three and
Train Speed Negotiation Window.
The Link Layer has Link Reset, Connections, SSP Frames,
Closing SSP Connections, Connections through Expanders, and Break.
The Transport Layer has SSP Frames Structures, Command IU, Data IU,
XFER_RDY IU, Response IU, and Error Handling.
The Application Layer has SCSI CDB, STP Operations and NACA.
2. Choose the tests in the left pane of the dialog and click the Add>> button.
3. Enter a value for DUT Type: Target, Initiator, or Expander.
4. Enter a value for the Number of Runs to run a particular test more than once.
5. Enter the DUT Name.
6. Enter the Connection Rate as Autospeed or a value.
7. To view failed test traces in the sample viewer, check the
Automatically load failed test traces into Sierra trace viewer check box.
8. To save the failed test traces only, check the Save only failed test traces check box.