Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 225)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 221
Analysis Teledyne LeCroy
3.3.4 Changing the Default View
Perform the following steps to change the default view of all trace files to Packet View:
1. Open a trace file.
2. Select the Packet View. Close all other views.
3. Select File > Save Workspace to open a Save As dialog. Save the current workspace
as a .wss file.
4. Select Setup > Preferences and select the Trace Viewer tab.
5. In the Default Workspace field, enter the path and name of the workspace .wss file
that you saved in step 3.
Because the default workspace contains only Packet View, the software opens trace files
in Packet View.
3.3.5 Spreadsheet View
Spreadsheet View displays all of the Packet View fields in a time sequential spreadsheet
format. To display the Spreadsheet View of the current capture, click
Analysis > Spreadsheet View or click the button on the toolbar.
Figure 3.13: SAS: Spreadsheet View
Figure 3.14: SATA: Spreadsheet View
Right‐click a column heading to go to Preferences, make all columns the same width,
choose Time Stamp Format, or Goto a position.
Right‐click a column heading to Hide or Show the column. To show the same columns
permanently, select Setup> Preferences > Trace Viewer > As Previously Saved.
Right‐click the column to Add Bookmark or Edit Bookmark, Set Time Stamp Origin, go to
Preferences, choose Time Stamp Format, Change Background (or Foreground) Color, or
Goto a position.