Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 130)

Teledyne LeCroy Emulation
128 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Figure 2.96: SAS: SCSI Dropdown List
The following menu options are available:
 SCSI Commands:
 MMC6
 SBC3
 SMC3
 SPC4
 SSC2
 OSD2
 ADC3
 User Defined
Adding a User-Defined SCSI Command (SAS only)
Click the Insert SCSI Command button and choose User Defined. This enters an
SCSI command line with editable fields to define your own custom command.
Figure 2.97: Insert SCSI Command
User‐defined SCSI commands are Non‐Data, Read from Block Device, Read from Non‐
Block Device, Write to Block Device, Write to Non‐Block Device, Bi‐Directional from Block,
Skip_Write, and Skip_Read.