Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 145)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 143
Emulation Teledyne LeCroy
This displays the Export to Initiator Emulator dialog.
Figure 2.127: Export to Initiator Emulator Dialog
4. Select the SAS or SATA protocol radio button.
5. Click the ellipses next to the Project Name address bar and select an existing *.sac or
*.stc file.
6. Choose an export range and item, Command, or FIS, then click Export.
7. After the export action completes, open the exported *.sac or *.stc file.
Figure 2.128: SATA: Host Emulator Program With the Exported Commands
You can run this set of commands immediately, or you can modify it by inserting
instructions and/or additional commands.