Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 368)

Teledyne LeCroy Creating Global Rules
364 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Keep in mind that a test state you implement with the Global Rules operates in parallel
with the active test state of each sequence in the scenario.
In effect, InFusion lets you do up to three line tests at the same time. You can do one test
with the Global Rules and a separate test with each sequence you create. You can have up
to two sequences in a scenario.
The following table summarizes the Global Rules examples that follow.
TABLE 4.5: Global Rules Examples
4.9.1 Example 1: Creating a Single Event and Action that Removes a Primitive
In this example, the Global Rules area of the scenario waits for each RRDY Normal
primitive from the initiator and removes it.
1. Click the New Scenario button in the main library or one of the device libraries.
2. In the Scenario Properties dialog, enter the scenario name, description, and
direction of traffic change (see Figure 4.17 on page 352 ).
3. In the Global Rules area, click the prompt to add an event.
Figure 4.24: Example 1: Adding an Event
The Event Properties dialog box appears (see Figure 4.19 on page 354 ).
4. In the Type column of the Event Properties dialog, choose Primitive > SAS Primitive.
Example Description
1 Creating a single event and action (removes a primitive).
2 Creating a single event and action (replaces a primitive).
3 Creating a combined event (a logical OR association of multiple events)
and an action.
4 Creating multiple triggers and actions.
5 Creating multiple actions on a single event.
6 Using timers.