Placing global settings in the generation block – Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual

Page 414

Text mode
Original mode

Teledyne LeCroy

Overview of Generation and Global Settings Files

410

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

For SAS emulation, the assumptions are opposite:



AutoAlignSATA is assumed to be OFF.



AutoAlignSAS is assumed to be ON.

For STP:



AutoAlignSAS and AutoAlignSATA are assumed to be ON.

Placing Global Settings in the Generation Block

Some global settings such as AutoAlign = On/Off can be set and reset in the generation
block. For example, you might want to set SASAutoAlign = ON prior to traffic generation,
and then change to OFF halfway through the generation session.

When placed within the generation block and then viewed in the trace window, global
settings appear as colored bars interspersed amidst the traffic.