beautypg.com

Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual

Page 36

background image

Teledyne LeCroy

Expandability

34

 

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

To remove an expansion card, follow these steps:

1. Unplug the system from AC power and turn the system so the expansion port is

facing you. Note the two retaining screws and the holes for the extraction tool that
are located on the panel of the expansion card.

2. Insert the extraction‐tool prongs into the holes in the expansion card panel.

Note:

If the prongs do not slip easily into the holes, use a small nail file or similar device to remove

paint from the prongs.

Holes in the
Expansion Card

See also other documents in the category Teledyne LeCroy Equipment: