Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 48)

Teledyne LeCroy Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars
46 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
1.22.8 Window
The Window menu has the following options:
 Cascade: Displays all open windows in an overlapping arrangement.
 Tile Horizontal: Displays all open windows in a above‐below arrangement.
 Tile Vertical: Displays all open windows in a side‐by‐side arrangement.
 Arrange Icons: Arranges minimized windows at the bottom of the display.
 Close All: Closes all windows.
1.22.9 Help
For more information see “Help Menu” on page 317.
1.22.10 Toolbars
The toolbars enable you to perform several actions, some of which are listed below.
 Show or hide fields and ports, change port names, and change data format.
 Show the layers and channels using their toolbars.
 Decode using the Decode toolbar.
 Search and Filter.
There are six sets of toolbars (see Figure 1.31 on page 47 ):
 Main Toolbar ‐ For details on the Main Toolbar refer to “SAS Main Toolbar” on
page 53 and “SATA Main Toolbar” on page 53 .
 Record Capture Toolbar ‐ For additional information see “SAS Main Toolbar” on
page 53 and “SATA Main Toolbar” on page 53 .
 Target/Device Emulator Toolbar ‐ For additional information see “SAS Main Tool‐
bar” on page 53 and “SATA Main Toolbar” on page 53 .
 Navigation + View Toolbar ‐ For additional information see “Navigation + View
Toolbar” on page 263 .
 Show Analysis Toolbar ‐ For additional information see “Show Analysis Toolbar”
on page 216 .
 Packets View Toolbar ‐ For additional information see “Packet View Toolbar” on
page 285 .