Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 311)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 307
Preferences Teledyne LeCroy
3.18.2 Trace Viewer Tab
Figure 3.131: Preferences Dialog Trace Viewer Tab
Open Trace file In
Default Workspace: The software opens a trace file in view(s) based on the specified
default workspace.
As previously saved: The software opens a trace file in view (views) based on the last
saved configuration for the
trace file.
Optimization
Sampling memory usage optimization: Enables memory cascading for two ports. The
analyzer will use memory of another port if there is not data on another port. (see
“Sampling Memory Usage Optimization” on page 312 )
Quick View: Quick View allows full access to the whole trace more quickly, especially
when using a Gigabit Ethernet connection. However, the trace is NOT written to the host
machine’s hard drive. To save the trace, you must manually click Save.
If you do not check Quick View, the trace loads more slowly but is automatically saved to
the host machine’s hard drive.