Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 223)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 219
Analysis Teledyne LeCroy
Latency Time
The time measured from the transmission of the command to the first data
transmitted for this IO operation.
Data‐Stat. Time ‐ Data to Status Time
The time between the end of data transmission for this command and the Status
frame.
Thrpt MB/s‐ Data Throughput
The payload divided by response time expressed in MB per second.
Duration
The time taken from the first DWord to the last DWord in a line.
Figure 3.9: Packet View Metrics Expanded
Copying Packets from a Trace to a Host Emulator Script
This check mark in the illustration below shows packet (s) selected to copy. You can copy
packet(s) from a trace and paste it into a host emulator script. That is why you can only
mark packets that we support in emulator and host side packets. You can also mark
multiple packets by left‐clicking and moving the mouse over multiple packets and then
right‐click to select them, and paste them in an emulator script.
Figure 3.10: Packets Selected to Copy