Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 477)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 473
Display Options Teledyne LeCroy
 STP BIST Activate FIS
 STP PIO Setup Device to Host FIS
 STP Data FIS
 STP Frame Summary Header
 SATA Frame Summary Header
 SAS Delta Time
Check boxes to allow a field when the selected header is collapsed. Example header fields
are:
 Frame Type
 Function
 Result
 Offset
 FIS Type
You can move items up and down.
You can select to Restore Defaults for the selected header or all headers.
Saving Display Options
You can save a set of Display Options values, make a set the default settings, or use a
saved set of values with the commands at the bottom of the Display Options window:
 To save the current Display Options values in an options file for use in future ses‐
sions, click Save. Enter a file name without a file name extension. The program
adds the .opt extension. (The file must have an .opt file name extension.)
 To load a previously saved .opt file, click Load and select a file name.
 To save the current Display Options values in the default.opt options file for use
as the default display options, click Save as Default. (Do not delete the
default.opt file.)
 To apply the current Display Options values, click Apply. The Display Options win‐
dow remains open.
 To apply the current Display Options values and close the Display Options win‐
dow, click OK.
 To cancel unsaved changes to display values and exit the Display Options win‐
dow, click Cancel.