4 launch jammer, 5 launch trainer, 6 crosssync control panel – Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual
Page 57
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
55
SAS/SATA Software Menus and Toolbars
Teledyne LeCroy
The results display shows each transaction for every layer identified in a different color
and the data direction identified with data direction arrows. Upstream traffic has an
arrow from right to left:. Downstream traffic has an arrow left to right: .
Layers can be hidden by clicking the corresponding Show/Hide button on the menu bar.
The system retains all captured data, but the display has fewer data layers for simpler
viewing.
You can configure the viewer display for test and viewing preferences (see
for details about configuring the viewer display).
The Analysis Project dialog offers you a comprehensive set of choices to create a trigger
and capture project satisfying some specific need. You can set the Analyzer to:
Capture specific patterns (see
“Patterns and Data Capture Setup” on page 65
).
Capture different patterns pre‐ and post‐trigger.
Exclude parameters from capture.
Trigger on a pattern or sequence of patterns (see
Configure trace capture memory (Settings tab).
Select file to save trace capture in memory (Settings tab).
Include a project note (Notes tab).
2.2.4
Launch Jammer
The Launch Jammer option invokes InFusion. For more information refer to
.
2.2.5
Launch Trainer
The Launch Trainer option invokes Trainer. For more information refer to
Traffic Generation” on page 397
.
2.2.6
CrossSync Control Panel
The CrossSync Control Panel allows you to select analyzers for synchronization and
manage the recording process. It supports a wide combination of Teledyne LeCroy’s
flagship analyzers including PCI Express, USB, DDR, Serial ATA (SATA), Serial Attached SCSI
(SAS), Fibre Channel (FC) and Ethernet.
CrossSync is Teledyne LeCroy’s analyzer synchronization solution that enables time‐
aligned display of protocol traffic from multiple daisy‐chained analyzers showing packet
traffic from multiple high‐speed serial busses. A lightweight software control panel allows
users to select analyzers for synchronization and manage the recording process. Captured
traffic is displayed using the latest analyzer software (in separate windows) with all the
protocol specific search and reporting features.
Captured packets are displayed in separate windows that share a common time scale.
Navigating the traffic in either direction will scroll to the same timestamp in a
synchronized window. When using the CrossSync option, users can access the full
complement of analysis capabilities available within the individual Teledyne LeCroy
software. Search, reporting, and decoding all operate normally.