Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 117)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 115
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
 The target emulator check box is not displayed at all until two or more emulator
channels are selected.
Figure 2.78: Target Emulator Check Box and Channel Speeds
Note: Analyzer must detect MUX primitives from both host and device sides to capture traffic correctly
in Muxing mode.
2.2.33 Add a Project Note
To enter and save information about the current project, click the Notes tab and enter the
data about the project.
Figure 2.79: Project Notes Tab