Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 325)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 321
Setup Menu Teledyne LeCroy
3.24.2 Clock Check
To perform a Clock check, choose the clock to test and click the Start Clock Check button.
After a short time, the Test Result appears to the right of the selected line.
Figure 3.146: SATA: Self Test Dialog Clock Tab
Test Result: OK or Error
If a test is OK and you specified one run, the Test Result is OK: 1 times.
If a test has an error and you specified one run, the Test Result is Error: 1 times.
Saving
You can save any check result by checking the Save error details check box and specifying
a destination file name.