Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 231)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 227
Analysis Teledyne LeCroy
Figure 3.24: Statistical Report Range Dialog
The default statistical report has All Samples. You can set a specific Statistical report range
between defined cursor positions or events.
Generating Statistical Read/Write Report
To create a statistical read/write page perform the following steps:
1. Click on Setup > Preferences .
2. Click on the Trace Viewer tab.
3. Check the box Create statistical report read/write page (see
Figure 3.25 on
page 227 .)
Figure 3.25: Enabling Read/Write Statistical Report
Note:
This setting should be enabled before you capture the trace file.