Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 160)

Teledyne LeCroy Emulation
158 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Check Auto update “sector Count/Transfer Len” before running ‐ If you want to
automatically calculate the sector count and transfer length per the payload data length.
Keep this unchecked to use the values entered manually in the emulation script.
Checking this option will manipulate the emulation script with the calculated values, but
unchecking it afterwards will NOT revert to the previous values. It is recommended to save a
copy of your script before checking this option. The message shown in
Figure 2.154 on
page 163 displays when you check this option.
Queue Settings
Click the Queue Settings button to display the Queue Settings dialog (see Figure 2.147 on
page 157 ) and for ATA specify:
 Queue Depth
 NCQ Error Recovery
 Queued/Non‐Queued Items Status
 NCQ/Queue Command Timeout
Specify the Queue Depth or SCSI.
Figure 2.147: Queue Setting Dialog