Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 443)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 439
Sierra Trainer Generation Language Teledyne LeCroy
Wait Command Name Description
WF_TIMEOUT Timeout Credit Available
When WF_TIMEOUT is requested in WAIT_FOR
command, the wait session will be released after
timeout has elapsed.
The Timeout value can be set two different ways:
1. Through the global WaitTimeout setting that
can appear anywhere in generation. Default value
is 1000 microseconds.
Syntax:
Set WaitTimeout = (in microseconds)
2. Through local WaitTimeout value for this
specific wait session.
Syntax:
WAIT_FOR ()
{WF_TIMEOUT }
In this case wait for other commands will be
released no later then after
number_of_microseconds, but global
WaitTimeout value remains unchanged for future
use.
See Generation\Include\
WaitCommands.inc in the program folder for the
samples of syntax.
WF_SOF primitive
WF_EOF primitive
WF_SOAF primitive
WF_EOAF primitive
WF_ACK primitive
WF_NAK_CRC_ERROR primitive
WF_NAK_RESERVED_0 primitive
WF_NAK_RESERVED_1 primitive
WF_NAK_RESERVED_2 primitive