Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 393)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 389
Scenario Batch Files Teledyne LeCroy
The Command Parameters Dialog contains the list of available commands and their
parameters from which to build scenarios and connected hardware and available ports.
4. Select appropriate parameters for the command and click OK to display the script in
the Script Workspace.
Note:
You can select ports from the port list, depending on number of ports licensed.
Note:
The hardware Serial Number can already exist or not. If the Serial Number exists, the Serial
Number (for example, S/N: 12871) is shown. In Offline and Simulation mode, you can enter a
Serial Number. In Online mode, you can only enter an existing Serial Number.
5. To add another command, click Click here to add another script command.
To copy a script command, right‐click on the command and select Copy. 
Right‐click Click here to add another script command and then select Paste.
You can also cut, delete, and edit a selected script command.
6. To edit batch commands, click the command, or right‐click the command and select
Edit from popup menu.