Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 154)

Teledyne LeCroy Emulation
152 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Incoming Open Primitive Response
To set a response to an incoming Open frame, check Incoming Open Frame Response,
select a Primitive from the drop‐down list, check Drop link for to drop link for the
specified milliseconds.
Figure 2.140: SAS: Open Primitive Response
Enable First Burst
Check the Enable First Burst box to specify to transfer the first burst data as defined by
the First Burst Size field in the Advanced Initiator Setting dialog. See
Figure 2.148 on
page 158 .
Task Attribute
Choose a task attribute of Simple, Head of Queue, Ordered, or ACA by checking the
corresponding option button.
Set Hard Reset
Check the radio button and enter the delay after command restarts to send the Hard
Reset.
LBA Overlay - Overwrites first Dword of:
Check the LBA Overlay ‐ Overwrites first Dword of check box. Select one of the two
options:
 Each sector with: Overwrites first Dword of each sector with given value
 First sector with: Overwrites first Dword of first sector with given value band
increments for next sector(s)
Outgoing SCSI Frame Settings
Before selecting Outgoing Frame Settings, select the Types Of Frames and the
Frame Number on which to inject an error. Then check Outgoing Frame in the Generate
Error On area and then the Settings button to display the Outgoing Frame Setting dialog
(see
Figure 2.141 on page 152 ).