Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 289)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 285
Packet View Toolbar Teledyne LeCroy
3.8.9 Show/Hide Ports
You can Show/Hide a Single Port or you can Show/Hide Multiple Ports. To do so click on
the Ch Down Arrow.
Show/Hide Single Port
If Single Port is selected, you can click on one port button at a time to show/hide the
capture for that port. Show/Hide Single Port is time consuming as it shows or hides one
port at a time.
Show/Hide Multiple Ports
If Multiple Ports is selected, you can click on multiple and ports and click Apply to show or
hide them. This mode is much faster. Click on multiple ports to show or hide them.
Figure 3.101: SAS: Show/Hide Ports Toolbar
.
Figure 3.102: SATA: Show/Hide Ports Toolbar
You can also show or hide a port by right‐clicking a Port ID in Text View or Column View
and choosing Show or Hide (see
Figure 3.106 on page 289 ).
3.9 Packet View Toolbar
The Packet View toolbar allows wrapping, zooming, and configuration.
The Wrap Packets button on the Viewer Toolbar wraps the packet data in the
display to eliminate the need for horizontal scrolling.
Go to CATC Navigation View. Click this button to change the trace display to a
CATC Trace™. 
You can change the colors, fonts, and so on, in the Trace Viewer Configuration
(see
“Trace Viewer Configuration” on page 297 ).