Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 449)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 445
Sierra Trainer Generation Language Teledyne LeCroy
WF_AIP WF_AIP_NORMAL
WF_AIP_RESERVED_0
WF_AIP_RESERVED_1
WF_AIP_RESERVED_2
WF_AIP_RESERVED_WAIT_ON_PART
WF_AIP_WAIT_ON_CONN
WF_AIP_WAIT_ON_DEVICE
WF_AIP_WAIT_ON_PARTIAL
WF_REC_RESOURCES WF_REC_RESOURCES_OUTPUT_A
WF_REC_RESOURCES_OUTPUT_B
WF_REC_RESOURCES_OUTPUT_C
WF_REC_RESOURCES_OUTPUT_D
WF_REC_RESOURCES_OUTPUT_E
WF_REC_RESOURCES_OUTPUT_F
WF_RCV_STATUS WF_SATA_R_ERR
WF_SATA_R_OK
WF_PM_REQ WF_SATA_PMREQ_P
WF_SATA_PMREQ_S
WF_PM_STATUS WF_SATA_PMACK
WF_SATA_PMNAK
WF_OPEN_REJECT WF_OPEN_REJECT_BAD_DESTINATION
WF_OPEN_REJECT_CONN_RATE_NOT_SUPPORTED
WF_OPEN_REJECT_NO_DESTINATION
WF_OPEN_REJECT_PATHWAY_BLOCKED
WF_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED
WF_OPEN_REJECT_RETRY
WF_OPEN_REJECT_STP_RESOURCES_BUSY
WF_OPEN_REJECT_WRONG_DESTINATION
WF_OPEN_REJECT_RESERVED_ABANDON_0
WF_OPEN_REJECT_RESERVED_ABANDON_1
WF_OPEN_REJECT
(continued...) WF_OPEN_REJECT_RESERVED_ABANDON_2
WF_OPEN_REJECT_RESERVED_ABANDON_3
WF_OPEN_REJECT_RESERVED_CONTINUE_0
WF_OPEN_REJECT_RESERVED_CONTINUE_1
WF_OPEN_REJECT_RESERVED_INITIALIZE_0
WF_OPEN_REJECT_RESERVED_INITIALIZE_1
WF_OPEN_REJECT_RESERVED_STOP_0
WF_OPEN_REJECT_RESERVED_STOP_1
Wait Command Group Group Contents