Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 215)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 213
Target and Device Emulation Teledyne LeCroy
Miscellaneous Features Tab
The following screen capture shows the Miscellaneous Features tab in the Advanced
Target Settings dialog.
Figure 2.207: Miscellaneous Features
To enable Asynchronous notification, perform the following steps:
1. Check the Support Asynchronous notification feature, and then specify the
millisecond Asynchronous notification interval and the Maximum number of
transmitted Asynchronous notifications.
2. To send a BIST frame, check Send BIST frame and enter a value for the millisecond
Delay before sending BIST FIS. Choose BIST flag options and enter or select DATA or
test pattern.
3. To support smart features, check Support smart feature set. 
For self test, check Enable smart self test. 
For error logging, check Enable error logging.
To return user data for READ DATA, check READ DATA returns user data.
To set threshold, enter an integer in Threshold exceeded. To never exceed threshold,
enter 0.
4. To enable Transmit Spread Spectrum Clocking, check Enable Transmit SSC.
2.6.15 Project Note
Click the Notes tab and enter a Project Name and a brief description of the Device
Emulation project (see
“Add a Project Note” on page 115 ).