3 port configuration for infusion, Ion dialog. see, Port configuration for – Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual

Page 345: Ion (see, Port configuration for infusion” on

Text mode
Original mode

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

341

Port Configuration for InFusion

Teledyne LeCroy

Figure 4.5: Device Ports Dialog

Alternatively, assign the scenario using the Library and Scenario drop‐down lists.

Figure 4.6: Scenario Drop-down List

After you have assigned scenarios to ports, in the first row of icons, use the first green
arrow icon to Run/Stop All Ports, or use the numbered green arrows to Run/Stop an
individual port.

Note:

A port row is grayed‐out when that port is running a scenario.

4.3

Port Configuration for InFusion

The InFusion (Jammer) port configurations must match the Analyzer port configurations
for the infusion‐analyzer to work.

Select Configuration > Port Configuration to display the Set Port Configuration dialog.