6 main fpga check (sata only) – Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual

Page 329

Text mode
Original mode

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual

325

Setup Menu

Teledyne LeCroy

3.24.6

Main FPGA Check (SATA only)

To perform an Inter‐FPGA Connection check, select the Main FPGA tab.

Figure 3.150: Self Test Dialog Main FPGA Tab

Choose the Inter‐FPGA Connection test and click the Start Main FPGA Check button.
After a short time, the Test Result appears to the right of the selected line.